BARTEC delivers the devices with the following operating system options.
  - Windows 10 IoT Enterprise CBB (based on Build 1803)
  - Windows 10 IoT Enterprise LTSC (based on Build 1809)

Part of the operating system is a recovery partition for recovery.
If the recovery is not possible via the internal recovery partition,
you can order a recovery stick from BARTEC or request the image of
the operating system.
The following device data is required for the request.

Please send following data to the BARTEC sales representative in
your region to receive the correct Driver package & Tools.
Link: Contact
  - Type number (see type lable)
  - Serial number (see type lable)
  - BARTEC build number of the installed OS (see type lable)
  - Operating system to be installed

The installation is described in BARTEC user manual.
You need following components:
  - external keyboard
  - bootable USB device with OS image
Follow the instruction in the chapter "Recovery".
The only difference is that you need to press the "F7" key on the keyboard
instead of "F6". All other steps are identical to "Recovery" chapter.

Installation instruction for the operating system version "LTSC".

To create a bootable USB stick you can use e.g. the tool "Rufus".
Available as download on the page of the programmer. Link: Rufus

To create a bootable USB stick you can use e.g. the tool "BootIce".
Available as freeware download in Internet.

Driver package & Tools for creation of customer own operating system is available on request.
Available for:
  - Windows 10 - 64 bit
Available as:
  - .exe (setup) or .inf (for SCCM) package

Please send following data to the BARTEC sales representative in
your region to receive the correct Driver package & Tools.
Link: Contact
  - Type number (see type lable)
  - Serial number (see type lable)
  - Operating system to be installed

Currently available BIOS version: v.1.29.xx (xx = customized version)
On request we can provide you with the current version.

WMMIO Driver v3.1^WHQL for Windows 10 (64-Bit)
driver is neccessary for use with service program
(Mobility Center or HotTab System Utility)
- it is compatible with SCCM Tool

SDK for application development is available on request.
Available for:
  - General device SDK
  - RFID HF Reader

Please send following data to the BARTEC sales representative in
your region to receive the correct SDK.
Link: Contact
  - Type number (see type lable)
  - Serial number (see type lable)
  - Operating system with build number (see system information and type lable)
  - What SDK is needed?

Tools & Driver package for creation of customer own operating system is available on request.
Available for:
  - Windows 10 - 64 bit

Please send following data to the BARTEC sales representative in
your region to receive the correct Tools & Driver package.
Link: Contact
  - Type number (see type lable)
  - Serial number (see type lable)
  - Operating system to be installed

Mobility Center System Utility v1.3.16 (for Agile S and Agile S NI)
This package provides the Mobility Center and camera system utility.
It compatible with all Agile X IS tablets running on
Windows 10 IoT Enterprise LTSC.

---

Installation instruction for Mobility Center & camera system utility.

---

Note: To use the Mobility Center correctly, the WMMIO driver from the
Drivers section is required.

Hottab System Utility v50.1.35 (for Agile S and Agile S NI)
This package provides the HotTab utility.
It compatible with all Agile S and Agile S NI tablets running on
Windows 10 IoT Enterprise CBB/SAC.

---

Collection of known questions and answers (FAQ).
- Battery and setup
- Question about operating system
- What is HotTab
- What is BIOS
- What is TPM
- Question about barcode data capture
- Question about RFID
- Question about WLAN
- Question about VoIP
- Question about GPS
- others

How can PXE (Preboot Execution Environment) be set up?
Agile S and Agile S NI support PXE boot via Ethernet.

What kind of GNSS module is built into the Agile S and how can it be addressed?
GNSS = global navigation satellite system

Data about u-blox NEO-M8 GNSS module:

General product information is available on this page.

Battery type: B7-A2Z0-0055 and 03-9921-0016
BARTEC declaration for battery of Agile S NI
- B7-A2Z0-0055: Standard battery
- 03-9921-0016: internal battery (hot-swap)
  Content:
  - MSDS for battery
  - Note for UN38.3 test report
  - Technical data

Test summary according to UN38.3 for battery type B7-A2Z0-0055
  

Test summary according to UN38.3 for internal battery type 03-9921-0016
  

BARTEC delivers the devices with the following operating system options.
  - Windows 10 IoT Enterprise CBB (based on Build 1803)
  - Windows 10 IoT Enterprise LTSC (based on Build 1809)

Part of the operating system is a recovery partition for recovery.
If the recovery is not possible via the internal recovery partition,
you can order a recovery stick from BARTEC or request the image of
the operating system.
The following device data is required for the request.

Please send following data to the BARTEC sales representative in
your region to receive the correct Driver package & Tools.
Link: Contact
  - Type number (see type lable)
  - Serial number (see type lable)
  - BARTEC build number of the installed OS (see type lable)
  - Operating system to be installed

The installation is described in BARTEC user manual.
You need following components:
  - external keyboard
  - bootable USB device with OS image
Follow the instruction in the chapter "Recovery".
The only difference is that you need to press the "F7" key on the keyboard
instead of "F6". All other steps are identical to "Recovery" chapter.

Installation instruction for the operating system version "LTSC".

To create a bootable USB stick you can use e.g. the tool "Rufus".
Available as download on the page of the programmer. Link: Rufus

To create a bootable USB stick you can use e.g. the tool "BootIce".
Available as freeware download in Internet.

Driver package & Tools for creation of customer own operating system is available on request.
Available for:
  - Windows 10 - 64 bit

Please send following data to the BARTEC sales representative in
your region to receive the correct Driver package & Tools.
Link: Contact
  - Type number (see type lable)
  - Serial number (see type lable)
  - Operating system to be installed

Currently available BIOS version: v.1.11.xx (xx = customized version)
On request we can provide you with the current version.

Driver - Desktop docking station type 03-9914-0022 - Windows 10 (64-Bit)

Description - Setting up the LTE- (WWAN-) module
Driver - LTE- (WWAN-) module - Windows 10 (64-Bit)

WMMIO Driver v3.1^WHQL for Windows 10 (64-Bit)
driver is neccessary for use with service program
(Mobility Center or HotTab System Utility)
- it is compatible with SCCM Tool

USB to UART Bridge driver v6.7.2 for Windows 8.1/10 (32/64-Bit)

Device Type Manager (DTM) according to the Field Device Tool (FDT) Specification 1.2.1
The DTM is no stand-alone program. It runs as component in an FDT frame application.

SDK for application development is available on request.
Available for:
  - General device SDK
  - 1D/2D Barcode Reader (SE4500-SR from Zebra)
  - RFID HF Reader
  - Camera (Standard Microsoft API used)

Please send following data to the BARTEC sales representative in
your region to receive the correct SDK.
Link: Contact
  - Type number (see type lable)
  - Serial number (see type lable)
  - Operating system with build number (see system information and type lable)
  - What SDK is needed?

Tools & Driver package for creation of customer own operating system is available on request.
Available for:
  - Windows 10 - 64 bit

Please send following data to the BARTEC sales representative in
your region to receive the correct Tools & Driver package.
Link: Contact
  - Type number (see type lable)
  - Serial number (see type lable)
  - Operating system to be installed

Mobility Center System Utility v1.3.16 (for Agile X IS)
This package provides the Mobility Center and camera system utility.
It compatible with all Agile X IS tablets running on
Windows 10 IoT Enterprise LTSC.

---

Installation instruction for Mobility Center & camera system utility.

---

Note: To use the Mobility Center correctly, the WMMIO driver from the
Drivers section is required.

Hottab System Utility v1.84 (for Agile X IS)
This package provides the HotTab utility.
It compatible with all Agile X IS tablets running on
Windows 10 IoT Enterprise CBB/SAC.

---

Information and FAQ about the WiFi module.
See instruction with notes.

How can TPM (Trusted Platform Module) be set up?
Agile X IS supports TPM with version 1.2.

Information for creating a customer's own operating system image on the Agile X IS.
  - Assignment of COM ports
  - Informationen about HotTab tool
  - Informationen about setup

The virtual keyboard is reduced in size after Microsoft update.
What can I do? See manual and bugfix.

• For operating system: Windows 10 Enterprise IoT CBB 1803

• For operating system: Windows 10 Enterprise IoT LTSB 1809 & SAC 20H2

How can PXE (Preboot Execution Environment) be set up?
Agile X IS support PXE boot via Ethernet.

General product information is available on this page.

Battery type: 17-A1Z0-0006
BARTEC declaration for battery of Agile X IS
  Content:
  - MSDS for battery
  - Note for UN38.3 test report
  - Technical data

Test summary according to UN38.3 for battery type 17-A1Z0-0006
  

Driver package & Tools for creation of customer own operating system is available on request.
Available for:
  - Windows 10 - 64 bit
  - Windows 8.1 - 64 bit
  - Windows 7 - 64 bit

Please send following data to the BARTEC sales representative in
your region to receive the correct Driver package & Tools.
Link: Contact
  - Type number (see type lable)
  - Serial number (see type lable)
  - Operating system to be installed

Currently available BIOS version: v.1.41.xx (xx = customized version)
On request we can provide you with the current version.

Driver - WMMIO v3.1^WHQL for Windows 7/8.1/10 (64-Bit)
Driver is neccessary for use of the HotTab System Utility

USB to UART Bridge driver v6.7.2 for Windows 7/8.1/10 (32/64-Bit)

Device Type Manager (DTM) according to the Field Device Tool (FDT) Specification 1.2.1
The DTM is no stand-alone program. It runs as component in an FDT frame application.

Micro USB Serial driver v2.0.0.1^WHQL for Windows 7/8.1/10 (32/64-Bit)

Driver is required for older systems to connect an external monitor to the docking station.
Driver for Windows 7/8.1/10 (64-bit)
Note: First uninstall the old driver before you install the new driver.

SDK for application development is available on request.
Available for:
  - General device SDK
  - 1D/2D Barcode Reader (EA30 from Intermec)
  - RFID HF Reader
  - RFID UHF Reader

Please send following data to the BARTEC sales representative in
your region to receive the correct SDK.
Link: Contact
  - Type number (see type lable)
  - Serial number (see type lable)
  - Operating system with build number (see system information and type lable)
  - What SDK is needed?

Tools & Driver package for creation of customer own operating system is available on request.
Available for:
  - Windows 10 - 64 bit
  - Windows 8.1 - 64 bit
  - Windows 7 - 64 bit

Please send following data to the BARTEC sales representative in
your region to receive the correct Tools & Driver package.
Link: Contact
  - Type number (see type lable)
  - Serial number (see type lable)
  - Operating system to be installed

Hottab System Utility v1.76 (for Agile and Agile X)
This package provides Hottab System Software Utility and is supported on the Agile and Agile X tablets that are running the following Microsoft Windows Operating System: Windows 7/8.1/10.

---

Installation instruction for HotTab system utility.

---

Note: To use the HotTab Utility correctly, the WMMIO driver from the
Drivers section is required.

Information and FAQ about recovery function and BIOS.
See instruction with notes.

How can TPM (Trusted Platform Module) be set up?
Agile X supports TPM with version 1.2.

Information for creating a customer's own operating system image on the Agile X
  - Assignment of COM ports
  - Informationen about HotTab tool
  - Informationen about setup

What kind of GPS module is built into the Agile X and how can it be addressed?

What kind of barcode scanner is built into the Agile X and how can it be addressed?
  - EA30 from Intermec
  - control via HotTab tool
  - internal connected to COM port 15
  - EasySetup Tool for more complex settings available on request

How can PXE (Preboot Execution Environment) be set up?
Agile and Agile X support PXE boot via Ethernet.

General product information is available on this page.

Battery type: B7-A2Z0-0028 and 03-9921-0016
BARTEC declaration for battery of Agile X
- B7-A2Z0-0028: Standard battery
- 03-9921-0016: internal battery (hot-swap)
  Content:
  - MSDS for battery
  - Note for UN38.3 test report
  - Technical data

Test summary according to UN38.3 for battery type B7-A2Z0-0028
  

Battery type: B7-A2Z0-0029 and 03-9921-0016
BARTEC declaration for battery of Agile X
- B7-A2Z0-0029: Long-life battery
- 03-9921-0016: internal battery (hot-swap)
  Content:
  - MSDS for battery
  - Note for UN38.3 test report
  - Technical data

Test summary according to UN38.3 for battery type B7-A2Z0-0029
  

internal battery type: 03-9921-0016

Test summary according to UN38.3 for internal battery type 03-9921-0016
See BARTEC manufacturer's declaration for MSDS and further data.
  

General product information is available on this page.

Battery type: B7-A2Z0-0027
BARTEC declaration for battery of Lumen X7
  Content:
  - MSDS for battery
  - Note for UN38.3 test report
  - Technical data

Test summary according to UN38.3 for battery type B7-A2Z0-0027